It appears that your current jack motor is going to be obsolete. You will need to replace your jacks with one of the following HappiJac sets if you wish to still use electric motors. The HappiJac Electric Truck Camper Jack System # LC736515-ELKIT is rated for 11,200lbs for all 4 jacks. These have a 36-1/2" lift with a 51" outer tube height.
We also have the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. These are capable of lifting 8,800lbs for all 4 jacks. And have a 34-1/2"... view full answer...
We have 2 different remotes available for HappiJac electric camper jack systems.
- Replacement Remote Control for HappiJac Electric Camper Jack Systems # LC723915
- Replacement Remote Controller for Wireless HappiJac Electric Truck Camper Jacks # HJ54ZR
The Replacement Remote Controller for Wireless HappiJac Electric Truck Camper Jacks # HJ54ZR works for all wireless HappiJac truck camper jack systems. So if your remote is currently wireless this would be the correct option.
More than... view full answer...
We have excellent options for replacing your truck bed camper jacks but we do not have a way to get the gears you'd need for the jacks that you currently have. Based on that you'd want the Brophy Cable Camper Jacks # CJ31 which has a 1,000 lb capacity. view full answer...
For electric camper jacks we have two options in the Happijac brand. The HappiJac Electric Truck Camper Jack System, # LC736515-ELKIT witha 36-1/2" lift and rated for a full 11,200 lbs. Or the HappiJac Electric Truck Camper Jack System, # LC736514-ELKIT that has a 34-1/2" Lift and rated for 8,800 lbs.
Which is best for your needs depends on what lift is needed for specific set-up. Both options have a clutch-less motor head that attaches to the jacks to eliminate the need for manual... view full answer...
Yes, Replacement Cap Kit for HappiJac Manual Truck Camper Jacks # LC183332 is the correct kit. This is for your Replacement Jack # LC736514 (4220) or the complete setup HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs # LC736514-4 (which is 4 of 4220). view full answer...
Your truck camper jacks are more than likely obsolete due to the age of your 1998 Big Foot truck camper. So unless they have been updated already you will need a new set of jacks.
You can replace them with a HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. This kit will allow you to operate each jack individually or control them all at once via the remote control.
You can also go with a HappiJac Manual Truck Camper Jack System # LC736514-4. To operate these you will need... view full answer...
It sounds like you're looking for the Replacement Remote Cable for HappiJac Electric Truck Camper Jack Systems # LC149557, and will work with the Replacement Remote Control for HappiJac Electric Camper Jack Systems # LC723915. view full answer...
You linked to the Brophy Cable Camper Jacks, # CXHD with a 57" max lift and combined weight capacity of 4,000 lbs and 2K individually; this option is only sold in pairs. However, the Brophy Cable Camper Jack, # CJ74H with a 67" lift is sold as a single unit. This is a 1,500 lb. rated jack. view full answer...
The only controller we offer for HappiJac Electric Truck Camper Jack System is the Replacement Remote Control for HappiJac Wireless Truck Camper Jack Receiver part # LC723915 which work with logic boards 723914 and 733513.
The Replacement Remote Cable for HappiJac Electric Truck Camper Jack System part # LC149557 would be correct if you need this as well. view full answer...
To replace the broken jack and motor of your 4100 Series HappiJac Electric Truck Camper Jack System # LC736514-ELKIT you'll just need the Replacement Jack # LC736514 and Motor Head # LC759927. view full answer...
The replacement upright pole for the Brophy Cable Camper Jacks part # CJ31 is the Replacement Upright Pole for Brophy Cable Camper Jack part # 1001. The replacement winch is the Replacement Winch for Brophy Cable Camper Jacks part # W14Z. The winch does not come with the cable and for that you will want to use part # 1002. view full answer...
If you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System # LC736514-ELKIT then you'll need part # LC182492. The flat bracket can be swapped out with part # LC182494 and the swing brackets can be replaced with part # LC182496. view full answer...
I'll start out by saying that trailer jacks aren't necessarily going to be camper specific, so I don't really have a way of determining which jack came on that camper originally. However, you've mostly likely got an A-frame tube jack with a 2" diameter tube (1-3/4" inner diameter), so you could likely use something like the Replacement Caster Wheel for Ultra-Fab Manual 2" Trailer Jack - Qty 1 # UF49-954035 to replace your old wheel. This is a 6" diameter wheel, so it would be slightly smaller... view full answer...
Yes, the Replacement Cap Kit for HappiJac Manual Truck Camper Jacks # LC183332 will fit your HappiJac Model 4150 jacks. I verified this with the manufacturer. view full answer...
I recommend looking at the Brophy Cable Camper Jacks Item # CJ74. These are universal jacks that are sold in pairs. They have a combined maximum weight capacity of 3,000 lbs and a lifting range from 17 inches to 67 inches. The Brophy jacks have an overall height when assembled of 76 inches and are operated by a hand winch.
I have attached a link to additional information. view full answer...
The HappiJac Electric Truck Camper Jack System # LC736514-ELKIT is the replacement kit for the 4100 series jacks that you have. It uses the same Replacement Jack # LC736514 and Motor Head # LC759927 for the front and rear jack positions. view full answer...
I have attached a link to the product page for the scissor jacks we offer for trailers or RVs.
I recommend scissor jacks like part # UF48-979002. These Ultra-Fab Scissor Jacks have a 24 inch lift and have a weight capacity of 6,500 lbs. These can be bolted or welded on for installation and feature footplates that measure 4-1/2 inches x 9 inches.
I have attached a product review video for this jack you can check out. view full answer...
What jacks do you have installed on your 1999 Lance 845 truck camper? If it's an older model then the only solution I know of is to completely replace the jack system itself with part # LC736514-ELKIT for a 34-1/2" lift or part # LC736515-ELKIT for a 36-1/2" lift.
If you can give me the exact model number of your camper jacks I can double check to see if we have anything you can use. view full answer...
You will need to get the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT as the motor for your 4160 electric jacks is obsolete. This kit contains the updated 4220 jacks with motors, wiring and remote control. The Motor # LC759927 will not work with your 4160 jack as it is a 2 piece construction acme screw drive, and the roll pins that connect the acme screw to the upper assembly can shear with the clutch-less motor. view full answer...
I do have a solution for you to have working landing gear for your truck bed slide-in camper, but unfortunately there are no replacement parts or motors for your Atwood 80491 truck camper jack system since Atwood went out of business a number of years ago.
Instead what you'll need to do is replace your entire jack system. We have the HappiJac Electric Truck Camper Jack Systems which are rated for 8,800 lbs # LC736514-ELKIT and 11,200 lbs # LC736515-ELKIT depending on what weight capacity... view full answer...
Go To Results